Universal joint filler Knauf Fill & Finish Light

Lightweight ready-mix for adhesive tapes and finishing joints in plasterboard partitions and ceilings by Knauf

*Price per piece

Application:

Knauf Fill & Finish Light is a thin coat, fine putty, lightweight ready-mixed universal finish for finishing joints in plasterboard partition walls and plasterboard ceilings. A very low shrinkage finish that is easier to sand than traditional grouts. Easy to apply for fast and smooth joint finishes. Interior applications: Plasterboard, Plasterboard, Concrete/gas concrete, Plaster, Precision blockwork. Can be diluted with water if required without altering the qualities of the product. The product can be used on both types of edges of boards. Textures- possibility for decorative structures and plasters. For internal application, in rooms with normal humidity. Two coats are required to achieve a smooth finished joint surface.

Properties, characteristics, technical parameters:

• Quality: Q4
• For interior application
• Ready-to-use mixture
• No mixing or set-up time
• Susceptible consistency
• Easy application
• Very easy to sand
• Good adhesive properties
• Low shrinkage
• Application time: material cures on drying depending on ambient temperature and humidity
• Working temperature: +10°C
• Recommended maximum thickness for one coat: 3 mm (After the coat has dried, if necessary, a corrective coat of maximum the same thickness of 3 mm can be made.)
• Packaging: 20 kg, bucket

Consumption rate:

Expected coverage: 45 m² per 20 kg tub
Rated putty consumption: 1.00 kg/m²/mm
Grout consumption Q1 - Q3: 0,350 kg per AK edge
Practical putty consumption Q4: Plasterboard approx. 0.500 kg/m²
Practical putty consumption: gypsum putty approx. 0.700 kg/m²
When plaster is applied with a paint roller or machine, the material can be thinned
with up to 1l of water per 20kg bucket.
The consumption strictly depends on the thickness of the putty layer!!!