Transparent flexible adhesive FIX EXPERT, TKK

Professional transparent flexible adhesive FIX EXPERT, TKK

*Price per piece

Application:

Professional super quality transparent elastic glue FIX EXPERT, based on hybrid STP polymer with innovative POWER-BOOST technology, suitable for making invisible joints between different materials, for elastic bonding of parts of structures subjected to vibrations, for invisible bonding of glass and other transparent and translucent materials. The adhesive has excellent adhesion to concrete, marble, ceramics, porcelain, glass, PVC, polyester, cork, aluminum, sheet metal, wood. Not suitable for PE, PP, PTFE. Designed for indoor and outdoor use. Chemically neutral adhesive, does not damage the surface, free of solvents, isocyanates and silicones.

Properties, characteristics, technical parameters:

• Transparent elastic adhesive
• For indoor and outdoor use
• Excellent adhesion to: concrete, marble, ceramics, porcelain, glass, PVC, polyester, cork, aluminium, sheet metal, wood
• Not suitable for PE, PP, PTFE
• Good extrudability even at low temperatures
• Does not set in vertical joints
• Excellent mechanical properties
• Natural; free of solvents, isocyanates and silicones
• Chemically neutral adhesive, does not damage the surface
• Does not cause corrosion
• Can be painted, solvent-based coatings are not recommended
• No volume change during curing, no shrinkage
• Resistant to weather, UV light and ageing
• Chemical resistance
• - Good: water, aliphatic solvents, mineral oils, fats, dilute inorganic acids and bases;
  - poor or no resistance to: aromatic solvents, concentrated acids and chlorinated hydrocarbons.
• Curing mechanism: with humidity
• Relative weight: 1060 ± 10 kg/m³
• Crusting time: 23 °C/50 % w/w. 15-25 min.
• Curing time: 23 °C/50 % RH 2-3 mm/day
• Application temperature: +5 °C to +30 °C
• Cured adhesive
• Shore A hardness: ISO 868 30-35
• Volume loss: ISO 10563 < 1,0 %
• Tensile strength: ISO 8339 0,9-1,2 MPa
• Modulus E 100 %: ISO 8339 0,7 MPa
• Elongation at break: ISO 8339 200 ± 50 %
• Tensile strength: ISO 37 1,90-2,30 MPaElongation at break: ISO 37 200-250 %
• Temperature resistance: -40 °C to +90 °C
• Substrate: hybrid STP polymer
• Colour: transparent
• Odourless
• Appearance: paste
• Packaging: cartridge 290 ml

Instructions for use:

*Apply the adhesive directly from the cartridge.
*The surfaces to be glued must be hard, clean, degreased and dust-free.
*To improve adhesion to certain surfaces, apply a suitable primer
*Adhesive bonding procedure:
- Apply the adhesive to the entire surface or to the edge of the surface
- Place the object to be bonded in the desired location no later than 15 minutes after application of the adhesive
- When bonding heavier objects, use additional mechanical fixation until the adhesive sets
- Uncured adhesive can be cleaned with alcohol and cured adhesive can only be removed
mechanically.