Болгарика БС ЕООД - Строителни материали за довършителни и ремонтни дейности - Бургас
CUTTING TOOLS
Hand cutting tools that come into frequent use are sheet metal and metal shears, pattern knives, saws, hole saw knife, plasterboard saw, itong saw, folding saw knife, mineral wool knife, discs, drill bits, ratchets, knife with breakable blade, spare blades, spare knives, mini hacksaw, dummy knife spare blades, dummy knives, hacksaw sheet, etc.
Saws as a type of hand tools are: ordinary or also known as Turkish saws, coarse-toothed saw, frame or tension saw, wide hand saw, fine-toothed saw.
The length of the band of the ordinary saw is 300-400 mm and the width is between 50-70 mm. An ordinary saw consists of a comfortable handle and a handle, the teeth are directed in the forward direction, so cutting is done by pulling.
The fine-toothed fitter has a thinner strip 250-300 mm long and 50-60 mm wide. This type of saw is used for more delicate cutting. Fine-tooth saws as a type of hand tools are divided into simple, reversible, single-sided and double-sided.
The length of the belt of the large-tooth spreader is 300 -350 mm, and the width is from 70 to 100 mm. This type of saw allows reinforcement of the upper end with a bent steel neck that does not allow any bending during the work process.
Manual metal shears are used for cutting sheet material and tin. The maximum sheet thickness for steel is 1.0 mm, for aluminum - 2.5 mm. Different tasks require the use of a tool with different characteristics.
Straight scissors for direct cutting. They can only be used for cutting in a straight line or in a circle with a large diameter.
Curved scissors. They have rounded blades that are convenient for cutting curly elements or holes.
Scissors with a lever mechanism. You can cut sheets up to 2.5 mm thick.
By the location of the blades, there are left and right tools.
The left ones are designed to make a cut rounded to the left side, and the lower cutting edge is located on the left. Hold them in your right hand. On the right, the location of the cutting edge on the right and the ability to cut, rounded on the right.
The cutting tool also differs in the method of manufacture. Products are made by casting or forging. Forged products are more expensive, but will last longer than cast ones and do not require frequent sharpening. To sharpen the scissors well, you will need a horizontal sander or a sander with an abrasive wheel to sharpen the cutters. You can have the scissors properly sharpened at the tool shop or it is better to take them to a specialist workshop.
Aluminium model knife 18 mm with rubber handle BERNER *Price per piece A
BERNER Blue Line double-edged knife, set case with belt holder and spare blades
BERNER 18mm/160mm model knife with metal blade guide *Price per piece Ap
Plastic knife 18mm with length 160mm Berner *Price per piece Application:
BERNER WoodLine HCS 2,5/75 Top jig saw blade *Price per piece Applicati
BERNER WoodLine HCS 4,0/100 Top jig saw blade *Price per piece Applicatio
BERNER WOODline HCS 1,3/50 C Top jig saw blade *Price per piece Application:
BERNER WoodLine 4,0/155 Top jig saw blade *Price per piece Application: T
BERNER Woodline HCS 5,0/240 Top sabre saw blade *Price per piece Application
BERNER Woodline HCS 4,0/150 C Top sabre saw blade *Цена за брой Application:
BERNER WoodLine HCS 2,5/75 R Top jig saw blade *Price per piece Applicatio
BERNER WoodLine HCS 1,2-4,0/75 C Top Sabre Saw Blade *Price per piece Application:
Циркулярен диск за рязане на дърво 115х36х22.23 мм, ПРЕМИУМ *Цена за брой Предназначение:.
Циркулярен диск за рязане на дърво 125х24х22,23мм, ПРЕМИУМ *Цена за брой Предназначение:.
BERNER WoodLine HCS 2,0-3,0/90 Premium sabre saw blade *Price per piece Application:
BERNER WoodLine HCS 2,2-4,6/200 Premium Sabre Saw Blade *Price per piece Applicat
Приспособление за заточване на ножове, метална направляваща, вакуумно закрепване MTX *Цена за бро
Трион за дърво "Piranha", 11-12 TPI, зъб-3D, двукомпонентна дръжка, Gross , GROSS *Цена за брой
Трион за дърво, 400 mm, 7-8 TPI, закалени 3D-зъби, незалепващо покритие на платното, двукомпонен
Трион за рязане на газобетонни блокчета ПРЕМИУМ 600мм *Цена за брой Предназначение: Три
Ръчен трион за гипсокартон ХАРДИ *Цена за брой Предназначение: Ръчният трион за гипсока
MTX gypsum building board saw, 180mm *Price per piece Application: The MTX plasterboard a
Трион за рязане на гипскартон *Цена за брой Предназначение: Трион за рязане на гипскар
Tрион за влакнести плочи 480мм *Цена за брой Предназначение: НОЖ ЗА МИНЕРАЛНА ВATA TOПЕК
Plastic tool, 3 cutting angles, 100 mm + saw 350 mm, MATRIX *Price per piece Purpose: The
Purpose: СИБРТЕХ plastic feed saw with 400 mm saw blade provides 4 cutting angles for mater
Scriber, 300 x 90 mm, plastic, 6 cutting angles SIBRTEX *Price per piece Purpose:
Ножовка за метал, 250-300 mm, метална дръжка SPARTA SPARTA *Цена за брой Предназначение: Р
Гъвкаво острие за ножовка за метал, 300 мм MTX *Цена за брой Предназначение: Еластичните
Лист за ръчна ножовка за метал *Цена за брой Предназначение: Лист за ръчна ножовка за ме
Double sided metal hacksaw blade *Price per piece Application: Metal hacksaw
Диск за рязане на метал *Цена за брой Предназначение: Диск ГРОС е подходящ за бързо и ка
Диск за мокро рязане диамантен (Jaguar) GROSS *Цена за брой Предназначение: Диамантеният
Professional diamond disc c laser perforation, wet cutting, GROSS *Price per piece Appli
Диск диамантен за сухо рязане, сегментиран, Ø115,125,230 х 22,2 мм, лазерно заварени сегмен
Диск диамантен за сухо рязане, турбо-сегментен, Ø115,125 х 22,2 мм, GROSS *Цена за брой
