CUTTING, DRILLING AND GRINDING TOOLS

Here you will find all the necessary cutting, drilling and grinding hand tools for dry construction: for GK, GF, insulation, wood, metal, concrete, brick. We offer you a selection of model knives, saws for GK, Itong, cotton wool, shears for sheet metal / metal, drills, drill bits, planers, discs, grinders and more.

Discs:

• Diamond - mainly used for processing non-metal, such as stone, asphalt, concrete. However, if there is an armature in the latter, they will easily handle it as well.
• Abrasive - these are discs for metal consisting of abrasive material reinforced with a special mesh, preventing it from breaking into pieces in case of any damage. They are usually noticeably thinner than the ones mentioned above and have no prongs.

According to the type of material to be cut

• Aluminum oxide models are used for steel and other materials. For non-ferrous iron and other, silicon carbide is intended.
• When you have to cut masonry, cement or concrete it is best to use a blade with a segmented edge, which cuts quickly but more roughly. If you apply this disc to more delicate surfaces, such as tiles, the roughness will show on their edges. The segmented edge of the blade facilitates airflow that cools the center of the disc without water and thus pushes debris out.

• The next type is the diamond disc with turbo blades, which is also suitable for masonry, brick, concrete. It features indentations at the edge and holes in the core to allow for easier passage of air. Can be used wet or dry.

• Continuous edge – this is a diamond disc that is perfectly suited for more delicate surfaces that, however, need precise cutting. These are discs adapted for work by wet cutting. They work slower, but the cleanest

• For a tree

• According to the machine - when working with harder abrasives, the machine should have more power. These are sandpaper, angle grinder, flex