Болгарика БС ЕООД - Строителни материали за довършителни и ремонтни дейности - Бургас
CUTTING, DRILLING AND GRINDING TOOLS
Here you will find all the necessary cutting, drilling and grinding hand tools for dry construction: for GK, GF, insulation, wood, metal, concrete, brick. We offer you a selection of model knives, saws for GK, Itong, cotton wool, shears for sheet metal / metal, drills, drill bits, planers, discs, grinders and more.
Discs:
- Diamond - mainly used for processing non-metal, such as stone, asphalt, concrete. However, if there is an armature in the latter, they will easily handle it as well.
- Abrasive - these are discs for metal consisting of abrasive material reinforced with a special mesh, preventing it from breaking into pieces in case of any damage. They are usually noticeably thinner than the ones mentioned above and have no prongs.
According to the type of material to be cut
- Aluminum oxide models are used for steel and other materials. For non-ferrous iron and other, silicon carbide is intended.
- When you have to cut masonry, cement or concrete it is best to use a blade with a segmented edge, which cuts quickly but more roughly. If you apply this disc to more delicate surfaces, such as tiles, the roughness will show on their edges. The segmented edge of the blade facilitates airflow that cools the center of the disc without water and thus pushes debris out.
-
The next type is the diamond disc with turbo blades, which is also suitable for masonry, brick, concrete. It features indentations at the edge and holes in the core to allow for easier passage of air. Can be used wet or dry.
-
Continuous edge – this is a diamond disc that is perfectly suited for more delicate surfaces that, however, need precise cutting. These are discs adapted for work by wet cutting. They work slower, but the cleanest
-
For a tree
-
According to the machine - when working with harder abrasives, the machine should have more power. These are sandpaper, angle grinder, flex
Свредло за бетон Ø 12/160, 210, 300, 450 мм *Цена за брой Предназначение: Свредла
Smirdex 935 Super Fiber Disc 180 mm *Price per piece Purpose: Smirdex 935 Sup
BERNER WoodLine HCS 2,5/75 Top jig saw blade *Price per piece Applicati
Свредло за бетон Ø 12/160, 210, 300, 450 мм *Цена за брой Предназначение: Свредла
SMIRDEX 510 Velcro Disc 225mm with 24+1 Holes *Price per piece Purpose: Velcro 5
BERNER WoodLine HCS 4,0/100 Top jig saw blade *Price per piece Applicatio
Свредло за бетон Ø 18/ 450 мм *Цена за брой Предназначение: Свредла за бетон &Osla
SMIRDEX 510 Velcro Disk 225mm with 6 holes *Price per piece Purpose: Velcro sandpa
BERNER WOODline HCS 1,3/50 C Top jig saw blade *Price per piece Application:
Свредло за бетон Ø 20/ 300 мм *Цена за брой Предназначение: Свредла за бетон &Osla
Sandpaper Velcro disc Ø225/ P120- P220 *Price per piece Purpose: Sa
BERNER WoodLine 4,0/155 Top jig saw blade *Price per piece Application: T
Stepped metal drill bit *Price per piece Application: MTX step drill bits are
SMIRDEX 750 Velcro disc 225mm Ceramic Net *Price per piece Purpose: Velcro
Свредло за бетон Multiconstruction PRO, 5 - 12 мм *Цена за брой Предназначение: Свредлат
BERNER Woodline HCS 5,0/240 Top sabre saw blade *Price per piece Application
Свредло спирално за метал Ø 2.0-3.5 мм, HSS-Co Gross *Цена за брой Предназначение: Св
SMIRDEX 510 Velcro disc 225mm without holes *Price per piece Purpose: Velcro
BERNER Woodline HCS 4,0/150 C Top sabre saw blade *Цена за брой Application:
Свредло за пробиване на метал * Цена за брой Предназначение: Свредлото за пробиване на ме
SMIRDEX 510 Velcro disc 220mm with 1 hole *Price per piece Purpose: Velcro sa
BERNER WoodLine HCS 2,5/75 R Top jig saw blade *Price per piece Applicatio
Свредло за метал *Цена за брой Предназначение: Свредло за метал МТХ е направено от инстр
SMIRDEX 510 Velcro Disc 225mm with 16 Holes *Price per piece Purpose: Velcro 75
Свредло спирално за метал Ø 4 мм, HSS-Co ГРОС *Цена за комплект Предназначение: Спира
BERNER WoodLine HCS 1,2-4,0/75 C Top Sabre Saw Blade *Price per piece Application:
Свредло спирално за метал Ø 4-12 мм, 338 W, HSS *Цена за брой Предназначение: Свре
Шкурка Awuko за ръчно шлайфане 97х70x25 мм, P100, P120, P150, P180, P200, P220 *Цена за брой
Циркулярен диск за рязане на дърво 115х36х22.23 мм, ПРЕМИУМ *Цена за брой Предназначение:.
