Болгарика БС ЕООД - Строителни материали за довършителни и ремонтни дейности - Бургас
CUTTING, DRILLING AND GRINDING TOOLS
Here you will find all the necessary cutting, drilling and grinding hand tools for dry construction: for GK, GF, insulation, wood, metal, concrete, brick. We offer you a selection of model knives, saws for GK, Itong, cotton wool, shears for sheet metal / metal, drills, drill bits, planers, discs, grinders and more.
Discs:
- Diamond - mainly used for processing non-metal, such as stone, asphalt, concrete. However, if there is an armature in the latter, they will easily handle it as well.
- Abrasive - these are discs for metal consisting of abrasive material reinforced with a special mesh, preventing it from breaking into pieces in case of any damage. They are usually noticeably thinner than the ones mentioned above and have no prongs.
According to the type of material to be cut
- Aluminum oxide models are used for steel and other materials. For non-ferrous iron and other, silicon carbide is intended.
- When you have to cut masonry, cement or concrete it is best to use a blade with a segmented edge, which cuts quickly but more roughly. If you apply this disc to more delicate surfaces, such as tiles, the roughness will show on their edges. The segmented edge of the blade facilitates airflow that cools the center of the disc without water and thus pushes debris out.
-
The next type is the diamond disc with turbo blades, which is also suitable for masonry, brick, concrete. It features indentations at the edge and holes in the core to allow for easier passage of air. Can be used wet or dry.
-
Continuous edge – this is a diamond disc that is perfectly suited for more delicate surfaces that, however, need precise cutting. These are discs adapted for work by wet cutting. They work slower, but the cleanest
-
For a tree
-
According to the machine - when working with harder abrasives, the machine should have more power. These are sandpaper, angle grinder, flex
Purpose: СИБРТЕХ plastic feed saw with 400 mm saw blade provides 4 cutting angles for mater
Приспособление за заточване на ножове, метална направляваща, вакуумно закрепване MTX *Цена за бро
Plastic tool, 3 cutting angles, 100 mm + saw 350 mm, MATRIX *Price per piece Purpose: The
Ножовка за метал, 250-300 mm, метална дръжка SPARTA SPARTA *Цена за брой Предназначение: Р
Трион за дърво "Piranha", 11-12 TPI, зъб-3D, двукомпонентна дръжка, Gross , GROSS *Цена за брой
SMIRDEX 750 Velcro disc 225mm Ceramic Net *Price per piece Purpose: Velcro
SMIRDEX 510 Velcro Disk 225mm with 6 holes *Price per piece Purpose: Velcro sandpa
SMIRDEX 510 Velcro disc 220mm with 1 hole *Price per piece Purpose: Velcro sa
SMIRDEX 510 Velcro Disc 225mm with 16 Holes *Price per piece Purpose: Velcro 75
SMIRDEX 510 Velcro disc 225mm without holes *Price per piece Purpose: Velcro
SMIRDEX 510 Velcro Disc 225mm with 24+1 Holes *Price per piece Purpose: Velcro 5
Smirdex 935 Super Fiber Disc 180 mm *Price per piece Purpose: Smirdex 935 Sup
Smirdex 935 Super Fiber Disc 115 mm *Price per piece Purpose: Smirdex 935
Smirdex 935 Super Fiber Disc 125 mm *Price per piece Purpose: Smirdex 935 Super
Abrasive disc for metal 115 mm *Price per piece Application: The 115x6x22.23 (A24, type 27
Циркулярен диск за рязане на дърво 115х36х22.23 мм, ПРЕМИУМ *Цена за брой Предназначение:.
Циркулярен диск за рязане на дърво 125х24х22,23мм, ПРЕМИУМ *Цена за брой Предназначение:.
BERNER 18mm/160mm model knife with metal blade guide *Price per piece Ap
BERNER Blue Line double-edged knife, set case with belt holder and spare blades
Plastic knife 18mm with length 160mm Berner *Price per piece Application:
Aluminium model knife 18 mm with rubber handle BERNER *Price per piece A
Свредло за бетон *Цена за брой Предназначение: Свредло за бетон Ø6х, SDS PLUS, ГРО
Silica-carbide mesh sandpaper, P 80- P 200, 115 x 280 mm, 10 pcs. SPARTA *Price per piece
Scriber, 300 x 90 mm, plastic, 6 cutting angles SIBRTEX *Price per piece Purpose:
Свредло за бетон *Цена за брой Предназначение: Свредлa за бетон Ø 8x110, 160, 210,
Свредло за бетон Ø 10/110, 160, 210, 300, 450 мм *Цена за брой Предназначение: Свр
Свредло за бетон Ø 12/160, 210, 300, 450 мм *Цена за брой Предназначение: Свредла
